Hey, thanks for downloading this file pack! If you do end up making your own version, please send me a link to your project or photo of it, as I would love to see it. 

You can DM me, or leave a comment on 
reddit https://www.reddit.com/user/HTLL_OFFICIAL/  
youtube https://www.youtube.com/@hightech-lowlife 
or 
instagram https://www.instagram.com/htll_official/

There is no license for this, hopefully you won't use it for commercial use as that is not the intention of me giving out these files. I don't require any credits, but if you like it and do give me a shoutout, I would appreciate it. 

I'm including the Fusion 360 file, I'm still very much learning 3D modelling so the timeline is trash with a lot of errors and I'm certain I did a lot of things wrong or the hard way that someone who knew what they were doing would scoff or throw up at. 

Most of the hardware is 4mm diameter screws, but there are some screw holes that are larger for the corners (I believe they are 5mm but could be 6mm), just look at the model for the appropriate size screws you need. 

The hinges are from a ThinkPad X260 model. 

This was made specifically for a Samsung Note 8 with a UAG phone case, you will have to rework the perimeters to get your phone to fit. I would suggesting building your own perimeter that you can test print iterations before printing the center chassis. 

NOTE: I printed this all with PETG and used "fuzzy-skin" texturizer in Ultimaker Cura slicer, so if you don't do that the tolerances will be slightly off as the fuzzy skin does waver at a small amount from a non fuzzy print.  

I'm linking the products I used but I honestly made this a few years ago and at least a few of these components are not available anymore such is the nature of electronics markets. You will probably have to source your own battery bank, and the type-c hub that is listed is crazy money for some reason, so find one that is similar or close enough on Aliexpress. 

Speakers (5W): https://www.aliexpress.us/item/3256805963200928.html
Bluetooth amplifier: https://www.aliexpress.us/item/3256804894735854.html
Magnetic type-c connectors: https://www.aliexpress.com/store/1101934155
Mini (mid sized) keyboard: https://www.aliexpress.us/item/2251832793966577.html 
Type-c hub: https://www.amazon.com/dp/B0CXHR37YJ (find a cheaper one on aliexpress)
"Power Add" 10,000Mah power bank (no longer available)

The acrylic is just smoke tinted 3mm thick, the graphics were laser etched. They are my graphics, please don't use them for anything other than personal use. I'm including the 2D templates that you could use to cut plastic (could be metal or carbon fiber really).

I think that's it, good luck, you got this! 